 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Part Number: ZMDKBGABBA45W www.SunLED.com 3.5x2.8mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Features SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. PACKAGE: 1500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation VR IF iFS PT MDK BGA BBA (InGa (InGa (InGa AlP) N) N) 5 30 185 75 5 30 100 120 1000 -40 ~ +85 -40 ~ +85 5 30 100 120 1000 Operating Characteristics (TA=25C) Unit V mA mA mW V C Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR MDK (InGa AlP) 1.95 2.5 10 BGA (InGa N) 3.2 4.0 10 BBA (InGa N) 3.2 4.0 10 Unit V V uA P 650 520 468 nm Electrostatic Discharge Threshold (HBM) Operating Temperature Storage Temperature TA Tstg D 635 525 470 nm 28 35 21 nm C Luminous Intensity (IF=20mA) mcd 35 100 100 pF Part Number Emitting Color Emitting Material Lens-color Wavelength nm P Viewing Angle 2 1/2 min. Red ZMDKBGABBA45W Green Blue Published Date : FEB 25,2008 InGaAlP InGaN InGaN Drawing No : SDSA5823 V2 Water Clear 70 70 36 typ. 198 198 69 650 520 468 P.1/6 120 Checked : B.L.LIU Part Number: ZMDKBGABBA45W www.SunLED.com 3.5x2.8mm SURFACE MOUNT LED LAMP MDK Published Date : FEB 25,2008 Drawing No : SDSA5823 V2 Checked : B.L.LIU P.2/6 Part Number: ZMDKBGABBA45W www.SunLED.com 3.5x2.8mm SURFACE MOUNT LED LAMP BGA Published Date : FEB 25,2008 Drawing No : SDSA5823 V2 Checked : B.L.LIU P.3/6 Part Number: ZMDKBGABBA45W www.SunLED.com 3.5x2.8mm SURFACE MOUNT LED LAMP BBA Published Date : FEB 25,2008 Drawing No : SDSA5823 V2 Checked : B.L.LIU P.4/6 Part Number: ZMDKBGABBA45W www.SunLED.com 3.5x2.8mm SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25,2008 Drawing No : SDSA5823 V2 Checked : B.L.LIU P.5/6 Part Number: ZMDKBGABBA45W www.SunLED.com 3.5x2.8mm SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS ZMDKBGABBA45W Published Date : FEB 25,2008 Drawing No : SDSA5823 V2 Checked : B.L.LIU P.6/6 |
Price & Availability of ZMDKBGABBA45W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |